Are they for a stock location UCA?

If only they were black.

 

They are designed to work with Fabtech or similar UCA but you can ad or build a bracket similar to what RCD uses for their shock hoop kits if you have factory upper control arms.

 

Bump

 

anyway these would work on a 6" pro comp 2500HD?

 

Thanks for the question, these will not be a direct bolt on for your application but can be made to work with some mods.

 

is this the bottom on these? they dont seem that far off from new.

 

The Resevior shocks are $225 each so times 4 = $900 the singles are $145 each times 2 = $290. Dual shock hoops are $450-$600 for the kit so total new would be around $1790. I priced @ $1000 but am open to offers if you have something close in mind let me know.
Thanks for the interest

 

Would you possibly only sell the shocks? Will they work with Cognito Hoops and UCA's?

Jeremy

 

Would you possibly only sell the shocks? Will they work with Cognito Hoops and UCA's?

Jeremy

Send me a PM with an offer and I will consider it, they should work with your Cognito parts no problem.

 

Length of front and rear shocks? They look a little short for a 11" lift... rides @ 20-21" will they work for me?

 

The front single shocks will work for a Fabtech 8" kit and they are 22" extended Eye to Eye. The dual shock hoop kit with the 4 Resivior Fox shocks should work on almost all IFS trucks they are 18.5" Extended from Eye to Eye.

 

A little too short for me, but thanx. Bump for some nice shocks!

 

No worries, thanks for checkin

 

Will you take $800 Shipped to 85254?

Thanks!!