They will fit if you try really hard. You will have to do at least a leveling kit and some decent trimming, there are users on here that have fit 35's without a lift. Confrontational is one of them, I believe he runs 35X13.5's on 10" wide wheels.

 

you can fit 35s on a stock truck with lots of cutting. i personally would not be comfortable doing that kind of cutting on my 50K truck but thats your call. a leveling kit will easily clear 33s and look good. you can stuff 35s with a leveling kit but your still going to cut some. a 6'' lift should clear 35s clean.

 

It doesn't look good as well. I almost went that route. I'm glad I did a 4 inch lift.

 

Yeah, you know this just looks like ass. :cookoo:

I run pretty wide 35's and it didn't take much trimming. Just a bit around the rear of the fender and lower valence. I've seen guys fit narrow 35's on stock wheels easier than I did.

 

:funnypost It looks TITS if you ask me.

 

i did mine.. so did _NAR_ made a thread about it as well.

backspacing has a lot to do with how they fit.

found it in this section as well search "fender"
http://www.dieselplace.com/forum/showthread.php?t=143842

 

Not 17 or 16" wheels but to give you an idea. If they are tucked in they will fit here are 34.5 nittos fit with fender triming and longer shocks.

here are the specs
22x9 Poltergeist 5.32 backspacing
34.5" Nitto Terra Grapplers 285/55/22

 

Did I hear an echo? lol

Mine are 9.5'' wide though

 

All the cool kids are doing it

 

Not the best pic of the wheels, but those are 35"s with just cranked keys and some triming

http://i244.photobucket.com/albums/gg33/custom8726/LB7inpond.jpg

 

Not the best pic of the wheels, but those are 35"s with just cranked keys and some triming

http://i244.photobucket.com/albums/gg33/custom8726/LB7inpond.jpg

You get stuck in that pic?

 

those trucks look awesome. my problem would be rubbing like crazy on heavy articulation. i have an 8'' fabtech and can stuff 35s in the wheel wells when its flexed offroad.

 

all you guys yalls trucks are awesome

 

I put 315's under mine with leveling kit and a little trimming, check my garage, I have no idea how to attach a pic to the post, sorry. Oh it doesn't look that good in my opinion!

 

I'm running 315's on my 03 and it doesn't hit when crossing rice levees. Not everyone has the stones to cut some useless sheet metal under a plastic cover. I did it to my 07 the first day I had it.

 

keep in mind to run 35's with no lift or leveled you have to ditch mud flaps to get extra clearence. If your on highway all the time its not a big deal but gravel roads and no mud flaps dont mix

 

Myth busted!!

 

Heres my 4" cognito and true 35x12.50's

 

Wow you chopped the hell out of the bumper didn't you!

 

I run H2 rims and tires on my 06 Crew Cab, with leveling kit and a little triming on lower valance. I did the same thing on my 02.

 

can you run a 305/60/20 they are the new h2 wheels they are 12.00" wide 34.40" in diameter and the same back spaceing as the 17" h2 wheels witch the 315/70/17 are 12.50" wide and 34.36" diameter. what did you need to do to make them fit. the truck is a daily driver never haul heavy and only tow 12,000 a couple times a year.

 

Another one leveled on 35s! (Cognito kit)

 

i have trouble alot of times telling the difference between the cognito 4-6 and the leveling kit. truck looks great man.

 

Absolutely looks like crap dont do it

specs in my garage

 

Very nice. Makes me wanna ditch the chrome and go taller! Damn, I'm an impulse buyer too. Knew I shoulda went to work today.

 

I have as well check my garage the bottom is the latest pics 325/60/20 pirellis on 20x10 negative offset bmf's, those pirellis actually measure out to 36/13.00's though and i just installed 2" wheel spacers all around no pics yet wit them though, i am running the O.R.U. level kit just keys and extended length bilstein 5100's all around and have 2" blocks in rear since i went from 33's to 35's, ZF6SMKNmax's truck(above post) those are my last set of wheels/tires the ambush and 35 km2's, both of us were very satisfied with them, and the appearance was GREAT!


if anyone wants to post the last pics in my garage of current setup or one prior to it with the ambush's and km2's feel free to i dont know how

 

Yeah ZF6SMKNmax truck turned out great i think it looks perfect i was glad the wheels i sold him turned out so well on there! for some reason i think that wheel tire combo looked so much better on his extended cab then my crew cab i dont know whey just thought so! i'v noticed too the 4-6 is hard to tell apart from level kit almost seems as if 4-6 isnt enough bang for buck, but then again it gives perfect angles ect... when not cranked. i fell like i'd pass it up for the 7-9 kit cranked all the way down just because of how little a noticable differenc the 4-6 seems to be. i have a question for you guys though, think if i got the cognito uca's my truck would sit higher in front 2" or so??? (keep in mind i already have torsion keys bout maxed and 2" block in rear and extended bilsteins running 36's as i stated above),i'd just like to gain a lil more clearance up front and get the nose up appearance a lil bit

 

^ My thoughts exactly... a 4-6 seems more like a leveling kit that rides better. A real "lift" start at the 7-9.

 

i have a question for you guys though, think if i got the cognito uca's my truck would sit higher in front 2" or so??? (keep in mind i already have torsion keys bout maxed and 2" block in rear and extended bilsteins running 36's as i stated above),i'd just like to gain a lil more clearance up front and get the nose up appearance a lil bit

as i stated above, wat yal think?

 

just looks horrible

this ones for the ford fans jordans trucks just a little heavy.

 

I'll post some pics, mine doesn't rub unless I hit a hard bump while turning.

Man I never thought I would start a revolution of people stuffin 35+ tires under a leveled d-max.

Oh to be #1

 

Yep it's one of the best looking adds/mods that can be done to these trucks IMHO. Ive been doing it since Dec 05' what number am I :