have a 2003 2500hd tech 4 and powershot 2000 installed by ppe and when I get on the pedel and go to shift to the next gear my clutch pedel will not engage or will stay on the floor have had it in the shop 5 times they already changed the flywheel on it any help out there
zf6 tran and hyd system
1 - 4 of 4 Posts
Keep going. I am sure that the powershot just applies more torque than the clutch can handle. May be it is toasting the clutch. It seems mine gets hard and does not release for a while (cooling)?
Once we hear from CPMac, who ordered a new flexplate to inspect, and he get's his solid flywheel designed, we can put a stronger aftermarket clutch on. Then the power should hold much better.
Do a search for 'ZF' and read the other threads.
Once we hear from CPMac, who ordered a new flexplate to inspect, and he get's his solid flywheel designed, we can put a stronger aftermarket clutch on. Then the power should hold much better.
Do a search for 'ZF' and read the other threads.
was in the shop once again and this time they replaced the clutch and the p/plate and the t/o bearing it seems to do alright but when i get on it i can still feel presure differences in the pedel it will get harder and normal driving its fine hope the come out with a solid flywheel thanks for your input rick
![]()
1 - 4 of 4 Posts
Join the discussion
Join now to ask and comment!