Diesel Place banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Recently had rear-end fluid replaced with 75-90 synthetic axle lube (GM P/N 12378261). Per TSB #01-00-90-001A-(02/08/2001) I should be using 75-140 P/N 12346140. This lube change was for preventive purposes only. I tow over 12,00 pounds and we travel alot. My selection of 75-90 lube was based on the owners manual and also had the Chevy dealership check to make sure this was the correct fluid. They did the drain and refill. Edited by: XFlatTopper
 

· Registered
Joined
·
3,245 Posts
Are there any drawbacks to the 75-140 in the Northern climate, as opposed to using the stock 75-90?


I realize both are a 75 weight oil, and the only difference is the flow charactoristics at 200 Deg F.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top