Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
594 Posts
Discussion Starter · #1 ·
I am looking for some new wheels, but i dont want the wheel to stick out too far outside my fenders. so my question is what size backspacing do i need and what width do i need. and does anyone have any pictures of their's. thank you. DirtyMax70
 

·
Registered
Joined
·
16,973 Posts
IIRC you will need a wheel with a 4.25 back spacing. I think that will keep it from sticking out too far.. Good luck.. Other idea is to do a search, I think you will find this has been covered a few times already..
 

·
Registered
Joined
·
1,458 Posts
Take your stock wheel off, let the air out of it and lay it face down. Then lay a straight edge across the back of the wheel, and measure from the straight edge down to the bolt circle. That will give you your stock backspacing. Remember, that if you go to a wider tire, it will stick out further with the same backspacing. Good Luck.
 

·
Registered
Joined
·
8,655 Posts
if you get a bigger backspacing, will that lend itself to more rub??
 
1 - 4 of 4 Posts
Top