Diesel Place banner

1 - 9 of 9 Posts

·
Registered
Joined
·
464 Posts
Discussion Starter #1
Wondering what size tube I need to buy so I can attach it to the fumoto nipple.

Thanks for any help...
 

·
Registered
Joined
·
535 Posts
Wondering what size tube I need to buy so I can attach it to the fumoto nipple.

Thanks for any help...
It is a (major) standard size, and it is smaller than 1/2"

I bought a couple feet each of a few sizes and do not recall exacly what size the tube is..... sorry I can't be more precise than that.
 

·
Registered
Joined
·
333 Posts
Take the valve into Autozone and have them match it to the right size.
 

·
Registered
Joined
·
1,124 Posts
I believe 3/8" tygon, (trade name for clear vinyl tubing), tubing will work just fine. The stuff cost about $5.00 per 20 ft. at the local DIY homecenter.
 

·
Registered
Joined
·
6,504 Posts
3/8" id hose or tubing.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #6
Thanks guys!!!
 

·
Registered
Joined
·
6,504 Posts
Take the valve into Autozone and have them match it to the right size.
Yeah, but then they get all *snitty* about trying your oily valve in the hose rack and that big puddle out in the parking lot!;) :joke:
 

·
Bac To The Future
Joined
·
23,029 Posts
Yeah, but then they get all *snitty* about trying your oily valve in the hose rack and that big puddle out in the parking lot!;) :joke:
:funnypost Tom, I could see that happening somewhere, and the person saying "I learnt about it on the DP!" :lol:
 

·
Registered
Joined
·
1,302 Posts
Yeah, but then they get all *snitty* about trying your oily valve in the hose rack and that big puddle out in the parking lot!;) :joke:
LOL. My thoughts exactly!!!!
 
1 - 9 of 9 Posts
Top