Diesel Place banner
1 - 10 of 10 Posts

·
Premium Member
Joined
·
831 Posts
Discussion Starter · #1 · (Edited)
This was laying on top of the front splash shield when I was working on the idler arm. I have looked everywhere but can't find anything it could have come from. It looks almost like an EGR gasket but it could not possible mine unless someone else took it apart. I am wondering if it might have come from the road?
IMG_0973 (Large).jpg
 

·
Premium Member
Joined
·
831 Posts
Discussion Starter · #2 ·
Hello, helloo, heelllooo, hheeelllloooo.
Any body? Any thoughts?
 

·
Registered
Joined
·
13,596 Posts
Leftover from the initial build?
 

·
Registered
Joined
·
339 Posts
intake tube gasket, just after the egr ..
 

·
Premium Member
Joined
·
831 Posts
Discussion Starter · #7 ·
intake tube gasket, just after the egr ..
Is this something that could come off by itself? Do you by chance have a picture of the place your speaking of? Could this be causing one of my codes? (Absolute Manifold Pressure)
 

·
Registered
Joined
·
265 Posts
no it is sandwiched between the lower intake tube and the upper one. can't just fall off. I bet you got one hell of a boost leak now
 

·
Premium Member
Joined
·
831 Posts
Discussion Starter · #9 ·
I am going to hit the dealer with this also. The only thing I have messed with that even remotely looks like that is the EGR Blocker. I did check it and all is tight! I can't really tell if there is a loss in boost. My gauge still reads a max of 32psi when i get on it.
 
1 - 10 of 10 Posts
Top