Diesel Place banner

1 - 20 of 635 Posts

·
Registered
Joined
·
653 Posts
Bought a rear camera to use with the Insight. Still need to install.
 

·
Registered
Joined
·
1,472 Posts
Set up an appointment on thursday to get the bedliner sprayed in, and likely a undercover folding tonneau cover installed. Between DW color options, wanting jet black interior, and my options list which included the 20" optional polished wheels, the only one we found had the spray in bedliner delete option.

Don't know if that was/is good or bad. Costs more to get one sprayed in, but don't know how the factory ones hold up. Using the same folks that did our 04, which still looks deep black and brand new after 10 years of use. State uses them for vehicles as well.
 

·
Bidness is Boomin'!
Joined
·
7,664 Posts
Discussion Starter #4
Pulled out of the driveway without unplugging it first. Luckily I had just used dielectric grease on the plug and extension cord. Truck is fine- wonder how far I pulled the cord out of the garage. Might be at the street!


Sent from AutoGuide.com Free App
 

·
Premium Member
Joined
·
14,363 Posts
Left it in winter hibernation. :HiHi:
 

·
Registered
Joined
·
56 Posts
Picking it up from from the dealer tonight.. Supposedly my Poor Exhaust Fluid Quality issue was resolved and I was assured it will stay that way. Sounds like the dealer utilized the GM TSB that was released in January. I was told they replaced both NOX sensors. My fingers are crossed, wish me luck?
 

·
Bidness is Boomin'!
Joined
·
7,664 Posts
Discussion Starter #7
Picking it up from from the dealer tonight.. Supposedly my Poor Exhaust Fluid Quality issue was resolved and I was assured it will stay that way. Sounds like the dealer utilized the GM TSB that was released in January. I was told they replaced both NOX sensors. My fingers are crossed, wish me luck?
Good luck with that. Hopefully they've got it all sorted out for you.
I'm leaning heavily toward tuning mine. It'll have to be emissions "compliant", just so inspectors don't look for missing parts.
FASS 150 is on the short list too.
 

·
Registered
Joined
·
170 Posts
Just commuted to work and back. Plugged it in so it starts up without straining the starter motor.
 

·
Diesel Head , Formerly my03diesel
Joined
·
409 Posts
Pulled out of the driveway without unplugging it first. Luckily I had just used dielectric grease on the plug and extension cord. Truck is fine- wonder how far I pulled the cord out of the garage. Might be at the street!


Sent from AutoGuide.com Free App

Lol that sucks, I've done it too. No you just have a longer extension cord😄
 

·
Registered
Joined
·
131 Posts
Starter her up at 6am while -10 outside and 3 inches of snow from over night. Cleaned the snow off of her. Carefully drove to work in 4x4. Saw 2 cars in a ditch on the way to work.
 

·
Bidness is Boomin'!
Joined
·
7,664 Posts
Discussion Starter #13
Lol that sucks, I've done it too. No you just have a longer extension cord.
:HiHi::HiHi::HiHi:
Everything looked okay at the house. The sheathing on my extension cord had some wear marks, but no big deal. Phew!
 

·
Registered
Joined
·
1,491 Posts
Installed an EGT probe for my Edge CTS...
It's nice to be able to drop the fender well liner out so easy with the screws in the panels. Next to air conditioned seats, that's my favorite part of this truck! :HiHi:
 

·
Registered
Joined
·
56 Posts
Good luck with that. Hopefully they've got it all sorted out for you.
I'm leaning heavily toward tuning mine. It'll have to be emissions "compliant", just so inspectors don't look for missing parts.
FASS 150 is on the short list too.
Thanks. So far, so good.. Ran great on the way to work this morning. The work order stated that they followed the TSB as I hoped they would so I am happy. :thumb: Time will tell from here on out. EFI LIVE is a definite for me in the future but I will likely wait for my power train warranty to expire.
 

Attachments

·
Registered
Joined
·
106 Posts
Installed Weathertech front over the hump one piece floormat and F/R window deflectors

*high fived self
 

·
Registered
Joined
·
2,833 Posts
Poor quality message probably won't return now that the sensors have been changed.
 
1 - 20 of 635 Posts
Top