[silentcrow2003]

Not on this forum that much so I don't know if they have something like this already but I stole this from the VW forums
so let's hear what you did to your 6.2 today

 

[turbovanman]

Drove it, :thumb:

 

[turbonator]

drove the bag off it pulling our loader up into a clients place.....

 

[legendman]

I thought about it today, too cold and dark to do any work on it.
But I am ready, suppose to be in the forties on Sunday.
I want to get it running again so I can shoot a video and have the pros here listen to it.

 

[roadhog0]

Drove it to school and back with a bad heater core still... New heater core shows up tomorrow and going in Saturday!!!

 

[turbonator]

worked truck pulling this to a clients house...

 

[ASPHALTVICTORY]

Patch pannels from tabco came in
I can't figure out where this inner rocker goes:think:

And I have to plug it in tonight got work tomorrow

 

[legendman]

Patch pannels from tabco came in
I can't figure out where this inner rocker goes:think:

And I have to plug it in tonight got work tomorrow

I have heard some don't run the inner rocker or they trim a bunch off the back end so crap doesn't collect there and rot out the new rocker.
Whoever did the rockers on my K30 did this and so far nothing has collected up under there.

 

[ASPHALTVICTORY]

I have heard some don't run the inner rocker or they trim a bunch off the back end so crap doesn't collect there and rot out the new rocker.
Whoever did the rockers on my K30 did this and so far nothing has collected up under there.

I just simply don't know where the hell it goes:think:

Tabco p# 50078L

 

[turbonator]

I just simply don't know where the hell it goes:think:

Tabco p# 50078L

post up a link, or a picture, the part number just shows up as JC whitney

 

[ASPHALTVICTORY]

post up a link, or a picture, the part number just shows up as JC whitney

I got a lmc part number #38-7840

 

[turbonator]

I got a lmc part number #38-7840

so, what doesnt fit? you probably have to slit the old rocker in a few spots to get the new one to fit right

 

[Diaric]

38-7840

Inner rocker provides support for the floor. spray it full of good undercoat after install.

I used that inner rocker, it works, needs some trimming to fit.

 

[ASPHALTVICTORY]

Guys I got a kick pannel outer rocker floor support this inner rocker and 2 floor pannels

And I have no idea where the inner rocker or the floor support go:think:

 

[ASPHALTVICTORY]

Inner rocker provides support for the floor. spray it full of good undercoat after install.

I used that inner rocker, it works, needs some trimming to fit.

Do you have a link or a photo from when you did it

I thought the bent part was from shipping

 

[Diaric]

No pics, I dove into my rockers and thought about the camera after. You'll figure it out when you cut your rusty rocker out and the floor pops apart and it becomes a mess.

 

[silentcrow2003]

cried over the cracks I found in it

 

[turbovanman]

Took my winter tires off, put the new tires back on the rear and put the ok ones back on the front.
Changed my fuel filters, finally removed my mechanical pump and put a shiny, chrome block off plate on-that's worth 50 HP, :hehe:
Made a batch of fuel using hydraulic oil and Jet A and filled up. Got another 110 gallons of hydraulic oil yesterday.:thumb:

 

[caraudiochef]

Got some parts in so I can put my cs144 alternator on my 6.2 .

 

[smackzed]

I didn't leave the house today. Season 4 of Breaking bad