Diesel Place banner

Upper Intake Project

6K views 23 replies 3 participants last post by  paleyjim 
You beat me on time....like the v-band option
when i measured i thought to use a 4" elbow welded to plate
...but i must convert my lower "S" intake to "F" before aptempt the upper intake.
 
Paleyjim....i would go with a straight reducer from turbo to tube, then a 45° elbow in the midle tube from turbo,...or end of tube, it depend from radius you can use/play to the 90° elbow from intake upper plate
 
with this configuration...minimum 2 elbow are needed for alignement
more straight is possible but that is.
 
i thought this winter about this work... more versatile as possible, to see what happen to air intake temperature,...free to future upgrade ...may be an intercooler upgrade also
 
i like your idea of a v-band instead of a silicon elbow to the plate
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top