Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
206 Posts
Discussion Starter #1
Well after i took my truck in for 4 new injectors i got it home and realized that the thing had thrown a code. Well by morning it had reset but now i cannot see the gear election screen or the odomoter while the vehicle is not running in the run key position. I took the truck in for a quick once over and the tech said there were a couple new items. 1 was the camshaft position sensor had been tripped also the truck thinks it is in the crank position when it is in the run position but it really is not cranking. what in the world is goin on. feels like my truck has started smokin something
 

·
Registered
Joined
·
206 Posts
Discussion Starter #4
well i had the vehicle serviced and they found did not find anymore problems with the timing but found that my dash instrument were acting funny because of the BCM and after replacing the BCM found that the ECM was bad as well. ended up costing me around 400 for parts and labor on the BCM.
 
1 - 4 of 4 Posts
Top