Diesel Place banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
825 Posts
Discussion Starter #1
Just thinking, why not install 3 identical filter heads in series with a 30, then a 10 and finally a 2 micron filter where the Nicktane filter is installed(pre OEM). Seems this would fix the "doesn't make sense to have a 10 after a 2" discussion. I would assume you would need a new fuel pump to push the fuel through the three tanks. Is it feasable?
 

·
Vendor
Joined
·
9,676 Posts
I've been considering using a 10 or 25 micron prefilter on my pump/filter combo to ease the load on the OE unit. I have the Mega plumbed after the OE for clean up duty. This would be a decent staged setup IMHO.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top