Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
333 Posts
Discussion Starter #1
Hey guys! I test drove an 04 cc/lb today that has a dmax/allison and when you would start from a dead stop and punch it, it would stall out before shifting into 4th gear. Like there would be a 4 second pause before it would actually shift into 4th. Ive not drove many of these trucks so Im not real familiar with how they act but that didnt seem right... Is that something they are supposed to do or not? The truck was all stock and has 60K miles on it. Thanks in advance!
 

·
Registered
Joined
·
60 Posts
was it warm when you punched it. they will sometimes stumble during shifts if cold
 

·
Registered
Joined
·
333 Posts
Discussion Starter #3
well it was cold outside but the tranny was at operating temp. I try not to beat on stuff when its cold lol... Im not that mean of a guy.
 

·
Registered
Joined
·
1,457 Posts
could be that the fuel filter needed changed. Since you were test driving it, some of the maintenance could need to be done.
 
1 - 4 of 4 Posts
Top