Diesel Place banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter #1
does any one know where i can get pics on straping the front end of the truck to pull ....tomacs website adress?





thanks kyle
 

·
Registered
Joined
·
3,605 Posts
I don't have any pics of my latest setup but with the torsen bars dropped all the way down I've been running a single strap that hooks to the crossmember below the centerlink then it goes around the centerlink then hooks back on to the crossmember. A small 1"-1.5" ratchet strap with j-hooks works the best.
 

·
Registered
Joined
·
24 Posts

·
Registered
Joined
·
3,605 Posts
that's the twin strap setup I was using before I started lowering the torsen bars. The twin straps keep the wheels pointed forward but you can only turn the steering wheel 90 degrees left and right.
 

·
Registered
Joined
·
133 Posts
Discussion Starter #5
thanks mike ....so only turning 90 dosent that make it hard to hook to the sled or not?
 

·
Registered
Joined
·
3,605 Posts
Yes, that's why I lower the torsen bars and use one strap in the middle of the centerlink now. With the single strap I can turn 360 degrees in each direction
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top