Diesel Place banner

1 - 6 of 6 Posts

·
Registered
Joined
·
787 Posts
Discussion Starter #1
Anybody notice their door locks sticking? I noticed today my drivers door is starting to stick. Any ideas on a fix before I go to the trouble of tearing the door molding off?
 

·
Registered
Joined
·
798 Posts
is it sticking when using the key? or sticking using the keyless entry? if its when using the key try a squirt of WD40 in the key hole that usually frees things up in there. if thats not it then ya might have to open up the panel and lubricate the linkages. worst case the lock solenoid could be goin bad and intermitenly working.
 

·
Registered
Joined
·
787 Posts
Discussion Starter #3
Only using the electric. I don't know that I have ever used the key to get in.
 

·
Registered
Joined
·
737 Posts
I have had this problem too, I am attribuiting it to the extreme cold. On the warmer days 15*+ I have not had problems. I have not tried the wd-40 although I have just moved, so I don't know which box it is in.
 

·
Registered
Joined
·
9 Posts
got the same problem I think it is due to the cold
 

·
Registered
Joined
·
1,656 Posts
I have the same problem in the cold. Once the truck is warm inside they work fine.
 
1 - 6 of 6 Posts
Top