Diesel Place banner

21 - 40 of 44 Posts

·
Registered
Joined
·
686 Posts
got some out to. I like the pre resistored Idea
 

·
Registered
Joined
·
923 Posts
I fixed the lights today, the circuit board is small and took some care not to solder the wrong thing but its done and it cost me less than $4.00.
 

·
Registered
Joined
·
700 Posts
In general you do have to use resistors, you are correct but they do have to micro-resistored LED's that are already built in the resitor chip for space issues. I have ordered 50 so I will let you know how they go but they definately look like they will fit alot better than what i have!

Have they come in yet? Will they work? Want to sell some of the extras? :D
 

·
Registered
Joined
·
368 Posts
How about some Pictures;)
Cosgr:Dve
 

·
Registered
Joined
·
2,479 Posts
Pre resistored and regular ole LED's....I switched my dash around again to support the color change!
 

·
Registered
Joined
·
82 Posts
How much are the new switches? Anyone know where to find compatible LEDs to replace the regular bulbs?
 

·
Registered
Joined
·
207 Posts
1999443 for the seek/volume
1999442 for the program/source
 

·
Registered
Joined
·
372 Posts
Are those the same part numbers for 2006?
 

·
Registered
Joined
·
207 Posts
site says for 03-05
 

·
Registered
Joined
·
67 Posts
Pre resistored and regular ole LED's....I switched my dash around again to support the color change!
Do the LED's dim properly without any problem?
 

·
Registered
Joined
·
393 Posts
Ok, I need some ideas. I got the button out on the bottom right. (info clear). but now i cant get clip to go back in. there is no wire to pull.
 

·
Registered
Joined
·
221 Posts
Leds In Steering Wheel

Ok so I popped my buttons out of my steering wheel. Stopped by RadioShack and went to get leds out of the tray in back got home and solder them in and worked for a second or two but then went out. The package didn't say resistorless but has anybody had the same problem about the leds? Have one that stays on fine but the others go out and dont come back on.
 

·
Registered
Joined
·
680 Posts
Does anybody know how much the new switches cost? i think at least one light in all 4 of mine are burned out
 

·
Registered
Joined
·
488 Posts
Does anybody know how much the new switches cost? i think at least one light in all 4 of mine are burned out
Dealer here wanted $48 ea installed, I think they're like $15/ea at PartsDirect. I had bulbs out in the lower two modules and replaced all 8 bulbs in the four modules for less than $10 and an hour's time.

Once you do one, the rest are a piece of cake...

I didn't use the LED's though....
 

·
Registered
Joined
·
61 Posts
I have 3 of these lights out in the truck.
1 on the steering wheel-seek
1 on the dash-recirt
1 in the back radio-power.

The truck is just coming to the end of the 3 year warranty.
What I would like to know is would they be replaced/fixed under warranty?

John
 

·
Banned
Joined
·
5,176 Posts
I have 3 of these lights out in the truck.
1 on the steering wheel-seek
1 on the dash-recirt
1 in the back radio-power.

The truck is just coming to the end of the 3 year warranty.
What I would like to know is would they be replaced/fixed under warranty?

John
Should be. 3yr/36K BUMPER to BUMPER. Theyll burn out again anyways.
 
21 - 40 of 44 Posts
Top