[dewey_20]

When I have these stacked i notice that my engine is sort of sputtering or missing. I dont know whats causing this. I usualy havethe PPE set on 240hp (which is the third stage) and my Edge box set on 90 (which is the 4th stage). can anyone help me out on this. Maybe just a better way to stck them (set them on differant tunes than the ones i have them one right now). And does the Van Aaken box stack better or the same as the Edge Juice???

Any help suggestions would be greatly appreciated.

Thanks,
Dwayne

 

[The Neens]

My guess is way too much injection timing...I believe you can get the PPE tuner without added timing for this purpose...Rumor is their new tunes do not require stacking...I'd contact Dan @ PPE...

 

[dewey_20]

My guess is way too much injection timing...I believe you can get the PPE tuner without added timing for this purpose...Rumor is their new tunes do not require stacking...I'd contact Dan @ PPE...

Thanks The Neens for this info.

Thanks,
Dwayne

 

[dewey_20]

My guess is way too much injection timing...I believe you can get the PPE tuner without added timing for this purpose...Rumor is their new tunes do not require stacking...I'd contact Dan @ PPE...

But what if i dont want to buy a brand new chip/tuner. What could i do then? is there anyway i could call PPE and asked for Dan and he could maybe take the tuner i have and turn the timming doen on it for me?

Can this be done???

Thanks,
Dwayne

 

[AlligatorPerformance]

Yes, give him a call and get it updated.

 

[dewey_20]

I did not know you could get one updATED thats AWESOME!!!! How much does it cost? Can he upgrade it to have just as much HP and TQ as both my PPE Hot +2 w/E.T. Eliminater and my Edge juice w/ATT moniter and if so will it still have the E.T. Eliminater and can i still use my edge box to moniter my engine but have it turned to stock?

Thanks, Dwayne

 

[LarryJewell]

I had the PPe stacked with the Edge and had the same sputtering/ surging you are talking about. I bought the Van Aaken and got rid of the edge and all was good. I have since went to EFI and am now selling my PPE & Van Aaken. If you want to stay with chips and programmers, then the PPE & Van Aaken is the way to go...........The next step is EFI, and it is a much better step. I will still make you a good deal on the a Van Aaken if you want it.