Diesel Place banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,232 Posts
The difficult part is pulling up the seat cover to get at the lumbar support mechanism. There is a J type fastener between the upper and lower cushions along with some velcro and 2 push pins. There is a window crank type clip on the inside holding the arm rest. Once the cover is pulled up you can get behind the cushion to reattach the spring or replace the mechanism. It is a pain to do and you might get some cuts on your hands.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top