[Roegs]

Maverick...I'm far from being an oil whiz, but Schaeffes web site lists the pour point for their #700 oil at -41 degrees. Mobil 1 is listed at -45 degrees. They sound pretty close to me, although I do not know if they use the same test methods. One of the oil guys at rv.net (kenneth) claims that the actual lower viscosoty of Schaeffers 700 is around 8W, not 15W. Food for thought....


I'm really thinking of using Schaeffers for my next change. You can see some comments on Schaeffers moly additive at:


http://www.rv.net./forum/Index.cfm/fuseaction/thread/tid/12982468.cfm





TYPICAL PROPERTIES
<TABLE cellSpacing=0 cellPadding=0><T>
<T>
<TR>
<TD class=Normal vAlign=top width=481>


SAE Grade</TD>
<TD class=Normal vAlign=top width=109>


15W-40</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


Viscosity 40°C Cst (ASTM D-445)</TD>
<TD class=Normal vAlign=top width=109>


110-126</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


Viscosity 100°C Cst (ASTM D-445)</TD>
<TD class=Normal vAlign=top width=109>


14.00-16.00</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


CCS Viscosity @ -15°C cP (ASTM D-5293)</TD>
<TD class=Normal vAlign=top width=109>


1,775</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


CCS Viscosity @ -20°C cP (ASTM D-5293)</TD>
<TD class=Normal vAlign=top width=109>


2,804</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


CCS Viscosity @ -25°C cP (ASTM D-5293)</TD>
<TD class=Normal vAlign=top width=109>


4,877</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


High Temperature High Shear Viscosity 302°F/150°C cP</TD>
<TD class=Normal vAlign=top width=109>


4.3</TD></TR>
<TR>
<TD class=Normal vAlign=top width=481>


Mini-rotary Viscosity-TP.1 @-25</