[Fountain Power]

I had a remote start installed yesterday. RS is made by Clifford. Now I am haveing a problem...when I use the remote start and let the truck run for a few minutes, the dilspay will read, "Check Brake System" and the ABS and Parking Brake light stay on. If I plug in my Hypertech, it does not show it throwing any codes. The display will shut off if I drive 100 feet or so. The Clifford Tech line was called and they do not know what to do. One other person had this problem with the same unit installed in his 05 LBZ/Allison too, but he is just ignoring it...The gassers are not doing this, it is only the DM'Allison... Anybody seen this or have any ideas???

 

[Max Power]

Everytime you remote start and only when you remote start? Did they power up the 'white' ignition 2 wire?

 

[varty yo]

x2

 

[Stubb444]

I had a Clifford 50.5X alarm w/remote start put on my '06 LBZ and it does the same thing, not all the time.

The code is a rear speed sensor code. The "Check Brake System" goes off when the Alli hits 2nd gear.

The guys that put it in had a DEI guy come look at it. The data bus module is the problem. They (DEI) are suppost to making one to work with the LBZ. I was going to call the guys at the end of the month to see if they got it done.

Hope this helps.

 

[Fountain Power]

Everytime you remote start and only when you remote start? Did they power up the 'white' ignition 2 wire?

Yes, everytime I remote start it if I let it run for more then a few minutes. If I remote start it and remote stop it right away, it does not do it.

As far as you second question, I do not know...

 

[Fountain Power]

I had a Clifford 50.5X alarm w/remote start put on my '06 LBZ and it does the same thing, not all the time.

The code is a rear speed sensor code. The "Check Brake System" goes off when the Alli hits 2nd gear.

The guys that put it in had a DEI guy come look at it. The data bus module is the problem. They (DEI) are suppost to making one to work with the LBZ. I was going to call the guys at the end of the month to see if they got it done.

Hope this helps.

Thank you, I will print this and take it to the installers...