Diesel Place banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
457 Posts
Discussion Starter #1
I have a set(2) of rear Rancho RS9000 shocks PN9005. These shocks are the previous years model which are 5-way adjustable instead of the newer 9-way.

RS 9005 Compressed-17.500 Extended-28.625 Travel-11.125

These shocks would be perfect for anyone you has lifted the rear of their HD 1-2". Below I have listed the replacement shock specs for a stock height truck and a truck running a 4" Rancho lift for comparrison purposes.

RS99274 Compressed-16.375 Extended-26.250 Travel- 9.875
RS99297 Compressed-18.500 Extended-30.500 Trsvel-12.000

Shocks have obviously been uses but are in good condition. Took them off when I replaced them with a set of reservoir shocks. If you are interested email me with an offer. Buyer pays shipping. Pictures available upon request.Edited by: y2kboti
 

·
Registered
Joined
·
1,146 Posts
y2k,


just an FYI, but the rs9000s c an be converted to the 9 way if you get the dials from that are on the x series. found that on a 4x4 page I visited. I think you can do the same thing with the remote in cab adjustable package too.


Ski
 

·
Registered
Joined
·
457 Posts
Discussion Starter #3
That is correct. There are no internal differences between the RS9000 5-way adjustable and the new RS9000X 9-way adjustable. The difference is the 9-way allows you to tune the shocks a little 'finer'.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top