Diesel Place banner
1 - 4 of 4 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello Every one, I sure hope you guys can help with this one!
I just installed the PAC AOEM-GM24 in my 07 Classic. I used the pink wire at B3 as a remote. I did a quick test to make sure everything worked by plugging it in and I had success. I ran the remote and RCA back to my amp. and now my radio and Climate control's display stoped working. Some times the climate control will start to come on but then turn right off????? Does anyone know if their is a fuse for the display on these things??? Any help would be greatly appreciated!
 

· Registered
Joined
·
202 Posts
Could it be the dimmer switch? If not check that all the wires are plugged in tight. Sounds like it could be a loose connection in one of the plugs.
 

· Registered
Joined
·
8,670 Posts
Has to be something with your dimmer switch there is not a fuse for just the displays and lights.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top