[TN farmer]

I want to know what I can do different because there are two Dodges that I can not beat (10ft diff.).


I am running Hot juice in HI range 1st gear and weighing in at about #8000, I have the bolts in my overload springs, 295 BFG A/T at 40psi and I just was wondering what else I can do.


I don't want to put a tranny in it so is this all I can do?


Does anyone try pulling on the LO side and will the stock tranny shift to 3rd or not?


Thanks for any help we have one more pull next weekend.


Robert

 

[TN farmer]

You can up the rev limit with a Quad can't you? I think this would help with ground speed.

 

[TN farmer]

JRmac, were you doing this with the stock tranny?


If so how long will the Allison last before upgrading if you only pull in LO range?


Thanks Robert

 

[TN farmer]

Thanks JRmac,


I will try LO range this weekend and if I have the same results I will call you and Craig about different programming options.


When you are in 3rd and the weight comes on you does the truck gear down to 2nd and spin out?

 

[TN farmer]

JRmac, I had a good pull last night and it will take a couple of times to get used to the shifting in 4LO. I took 3rd with a 293ft pull and the two Dodges where full pulls (one has a Suncoast auto. & the other a Mitchell clutch).


There were 15 diesels there and I felt like I did ok, but knowing you beat one of these trucks at Terra Haute with your setup has me wanting to add a box or something.


I have a card with Craigs cell phone, is this the best way to reach you? Do yall have a web site for MAC's performance?


Thanks Robert