Diesel Place banner
1 - 8 of 8 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
So my PCV valve is leaking from the bottom of the hose directly under it. I can post pictures later. I'm planning on replacing the valve anyhow, but wondering if there's a separate seal or gasket or hose I need to get in order to fix that leak spot?
 

·
Administrator
Joined
·
19,363 Posts
So my PCV valve is leaking from the bottom of the hose directly under it. I can post pictures later. I'm planning on replacing the valve anyhow, but wondering if there's a separate seal or gasket or hose I need to get in order to fix that leak spot?
There is a rubber grommet that seats into the valve cover. The CDR (or pcv valve) bottom tube is sealed by the grommet
 
  • Like
Reactions: tigert

·
Registered
Joined
·
13 Posts
Discussion Starter · #3 ·
There is a rubber grommet that seats into the valve cover. The CDR (or pcv valve) bottom tube is sealed by the grommet
Okay thanks, will need to check if the PCV valve I ordered from Rock auto comes with that. Otherwise I'll have to find it somewhere else I suppose.
 

·
Administrator
Joined
·
19,363 Posts
The CDR Grommet part number is:

GM: 3989350
You can research it online or look in your local auto parts stores for universal fit grommets
 
  • Like
Reactions: tigert

·
Registered
1995 GMC Suburban
Joined
·
18,193 Posts
The part usually does not come with the grommet.

You have to buy it separately per part no provided by OKDually;
 
  • Like
Reactions: OkDually

·
Registered
Joined
·
4,392 Posts
The part nums for that rubber grommet are 23500817 or 23503122.
I.D. is about 15/16".
I have not been able to find any replacements.
 
1 - 8 of 8 Posts
Top