Diesel Place banner
1 - 12 of 12 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
Im sure this has been covered, but anyways.... the rubber connector on my turbo (drivers side) the one that heads down to the intercooler is covered in dirty-sooty oil. I have tightened the connectors but it sill manages its way out..

any explaination to this? will the PCV re-route correct this? or help?
 

·
Registered
Joined
·
454 Posts
yes, it will correct your problem. i did the pcv reroute at 1000 miles and cleaned the the boots. took the intercooler tube off a couple weeks ago and it was still oil free!
 

·
Registered
Joined
·
2,534 Posts
Yes re-route your pcv, it will stop all the oil going through your turbo, intercooler and into the motor
 

·
Registered
Joined
·
712 Posts
I concur with the pcv reroute suggestions
 

·
Vendor
Joined
·
3,579 Posts

·
Registered
Joined
·
1,288 Posts
x2. that kit is awesome
 

·
Registered
Joined
·
626 Posts
x3. Very clean install for a very nice truck. Did the LMM at 600 miles.
 

·
Registered
Joined
·
394 Posts
x3 on the kit. It works great. Make sure to get the upgrades.
 

·
Registered
Joined
·
25 Posts
tony how much and how can i get a pvc reroute kit
 

·
Registered
Joined
·
4,096 Posts
tony how much and how can i get a pvc reroute kit
You probably need to call him if you want a quick answer.
I just bought mine last week the deluxe kit (better choice) $100
All season service & sales phone # 989-479-0444
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top