Diesel Place banner
1 - 9 of 9 Posts

·
Registered
Joined
·
236 Posts
Discussion Starter · #1 ·
Well the package showed up today. I am on the way to the old muffler shop to dismember my exhuast system. Can I make it home with no DPF? Anything I should know about doing the Quad install? Thanks-
 

·
Registered
Joined
·
164 Posts
I installed the exhaust first as the ups driver would not leave the programmer without a sig. so I had to set a time to meet him two days later. Anyway the truck ran fine just had the light on. When I installed the programmer do just as it say's turn every electronic thing you can off as it can lock up on you as mine did(forgot to unplug gps) and then you have to start over.
 

·
Registered
Joined
·
206 Posts
yes remove all the lines and fittings, the bolt up in the middle of the bed under neath of course and you can remove them as a whole assy. then but some plastic bags of the connectors and zip tie them up.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top