I fried my stock pcm loading a Bullydog PMT they sent a new one reflased with my OS but truck wont start. Tried pass key relearn still nothing. What is next??? I need this thing fixed ASAP. thanks in advance
Attempt to start the engine, then release the key to ON; the vehicle will not start.
Observe the SECURITY telltale; after approximately 10 minutes the telltale will turn OFF.
Turn OFF the ignition, and wait 5 seconds.
Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes; the vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.
The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password.
[*]With a scan tool, clear any DTCs, if needed. History DTCs will self clear after 100 ignition cycles.
A forum community dedicated to Chevrolet and GMC diesel truck owners and enthusiasts. Come join the discussion about duramax engines, performance, builds, modifications, classifieds, troubleshooting, maintenance, and more!