Diesel Place banner

1 - 8 of 8 Posts

·
Registered
Joined
·
564 Posts
Discussion Starter #1
I've been looking on Cognito Web Site and I can't get find the Cam and Alignment settings anymore? Does anyone have those?:(
 

·
Registered
Joined
·
564 Posts
Discussion Starter #2
Some one has to have these specs laying around some :( :( :( where?
 

·
Registered
Joined
·
881 Posts
this was in a thread posted not too long ago

Cognito leveling 2-3 upper arms specifications:
*Caster, +4.0 to +5.0 degrees with both sides within 1/2 degree of one another.
*Camber, +.25 degrees.
*Toe, 0" to 1/16" toe in.
 

·
Registered
Joined
·
564 Posts
Discussion Starter #4
Sry I guess I should have said I needed it for a 10-12" Lift set at 12"

moore87;1572873; said:
this was in a thread posted not too long ago

Cognito leveling 2-3 upper arms specifications:
*Caster, +4.0 to +5.0 degrees with both sides within 1/2 degree of one another.
*Camber, +.25 degrees.
*Toe, 0" to 1/16" toe in.
 

·
Registered
Joined
·
1,632 Posts
i just dug up my directions and it says:

10-12 kit
Caster +2 - +4 degrees with both sides within 1/2" of one another
camber +.25 degrees
toe 0" - 1/16" toe in
 

·
Premium Member
Joined
·
9,432 Posts
Right on B-rad, your fast...

01-07 GM 8Lug

Have the vehicle professionally aligned to the following specifications:

10”-12” kit
Caster, +2 to +4 degrees with both sides within ½ degree of one another.
Camber, + .25 degrees.
Toe, 0” to 1/16” toe in.
 

·
Registered
Joined
·
564 Posts
Discussion Starter #7
Thanx a lot guys.

1sic250;1573463; said:
Right on B-rad, your fast...

01-07 GM 8Lug

Have the vehicle professionally aligned to the following specifications:

10”-12” kit
Caster, +2 to +4 degrees with both sides within ½ degree of one another.
Camber, + .25 degrees.
Toe, 0” to 1/16” toe in.
 
1 - 8 of 8 Posts
Top