Diesel Place banner

1 - 8 of 8 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
Does any body know where to get a reasonably priced rearend with 4.10 gears? used or rebuilt
 

·
Registered
Joined
·
723 Posts
Randy's Ring and Pinion
 

·
Registered
Joined
·
723 Posts
...but if you are running 36's, I'd go with 4.56's
 

·
Registered
Joined
·
3,343 Posts
sgardner;1584901; said:
Does any body know where to get a reasonably priced rearend with 4.10 gears? used or rebuilt
I'll give ya mine after I get it replaced, but you'll be asking the same question after you get it.......;)

Mark:beerchug:
 

·
Registered
Joined
·
99 Posts
Discussion Starter #5
Wouldnt 4.10 gears be appropriate? i thought 4.56 gears would be toooo low. i do alot of light hauling and moderate pulling. i still want to be able to go down the freeway at 70.
 

·
Registered
Joined
·
723 Posts
mathematically, 4.56's bring you back to ALMOST stock conditions. Your RPM's will be around 150rpm's highter at 70...or so I'm told.
 

·
Super Moderator
Joined
·
5,988 Posts
What is broken in your axle? GM 14 bolts are one of the easiest axles to rebuild.:cool:
 
1 - 8 of 8 Posts
Top