Diesel Place banner

1 - 11 of 11 Posts

·
Premium Member
Joined
·
1,461 Posts
Discussion Starter #1
Not really looking for a programmer but something for monitoring engine parameters especially turbo vane positions.Any suggestions,thank you
 

·
Registered
Joined
·
5,235 Posts
Edge Insight CS or CTS Digital Monitor
 
  • Like
Reactions: 97chevor

·
Premium Member
Joined
·
1,461 Posts
Discussion Starter #3
Thanks Rodney!Now another question about PIDs.I have an Actron CP 9575 scanner-reader with view data that reads PIDs sent out by the ECM but is not picking the PID VGT_A_ACT,B_ACT which is turbo vane position.The manual for the Actron has that PID listed and says it will read it if the vehicle ECM supports it.I wonder why the ECM is not sending it out to the scanner.Would I have the same problem with the Edge Insight or is the problem with my scanner?The scanner picks up other PIDs.
 

·
Premium Member
Joined
·
1,461 Posts
Discussion Starter #5
When you want to monitor turbo vane position with the CTS do you have to choose the PID I have listed as VGT_ACT_,B_ACT ? I talked with a tech from ACTRON who said that the PID is a Global OBD2 pid and that GM must have an enhanced PID for turbo vane position that the Actron will not read!
 

·
Registered
Joined
·
15 Posts
When I click on the CTS to add / update a new PID, the list of available PIDs to choose from shows as 'Turbo Vane Position' and then displays as VPOS on the PID.
 

·
Registered
Joined
·
11 Posts
Here's an old thread that I'm curious about. Has anyone figured out how to display the turbo vane position in torque pro?

Thanks in advance.
 

·
Registered
Joined
·
2,513 Posts
Here's an old thread that I'm curious about. Has anyone figured out how to display the turbo vane position in torque pro?
Thanks in advance.
Have you asked your question on the torque website if there is a PID for turbo vane position %
 
1 - 11 of 11 Posts
Top