Diesel Place banner

1 - 1 of 1 Posts

·
Registered
Joined
·
504 Posts
Discussion Starter #1
I am chasing a loosing prime condition.
I've replaced the return line from steel line to tank, replaced the return lines between the injectors, replaced the 1/4 in line from the IP and the pressure lines seem to be good.

I checked the tank and pressure lines (even put a clear line before the lift pump and no air).

I think the metal line has a crack or rust hole in it. Where can I get one or can I replace is with flexible and some T's?
 
1 - 1 of 1 Posts
Top