Diesel Place banner
61 - 65 of 65 Posts

·
Registered
Joined
·
130 Posts
Oops ! wrong thread sorry 1969x11 !
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #62 ·
Ok guys this thing is kicking my ass!!! 1/2 throttle and everything is fine. Over 1/2 throttle it bucks violently and throws p0700 and p0880. Both are tcm codes,and I hate to blindly start throwing parts at it. HELP!!!
 

·
Registered
Joined
·
587 Posts
Check and make sure the plug on the tcm is on right, I ran into a problem with weird tranny codes once and a while and the plug hadn't seated right, so when you where on the gas the engine tugged on the harness and it would lose connection

I ended up removing the tcm from the fan shroud so I could see better, no problems since


Skippie
 
61 - 65 of 65 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top