Diesel Place banner

1 - 1 of 1 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I first noticed a slight Knock while pulling a 5500lb trailer uphill. It is really noticeable when hammering it though, loaded or not. The filter has less than 1500 miles, I re-sealed the FF head, FPR was replaced a year ago and all FI connectors ice picked. I also run Stanadyne in every tank per recommendations.

I'm not sure if it relevant but the balance rates on the torque Pro are all below 3. No tune, all stock except EGR, PCV, eliminated, and an aftermarket mouth piece.

Any ideas where to look next?
 
1 - 1 of 1 Posts
Top