[SmokinMax]

I copied these straight from TDR


CONGRATS GRAIG

KC Dyno Results


Chevy
Craig Macelfresh- HP=592 TQ=1058
Ron Hitchings- HP=438 TQ=776
Robert Shelton- HP=194 TQ=333

Ford
Landon Holmes- HP=397 TQ=794
John Morrison- HP=326 TQ=663
Robert Clark- HP=308 TQ=684
Ted Gann- HP=253 TQ=579
Kevin Hershberger- HP=224 TQ=430

Dodge
Jeremy Homeyer- HP=531 TQ=1082
Adam Harmon- HP=497 YQ=1056
Doug Hatfield- HP=446 TQ=959
Lynn Cadwell- HP=430 TQ=909
Eric Krupp- HP=411 TQ=970
David Goode- HP=388 TQ=980
Paul Alt- HP=371 TQ=371 TQ=883
Steve Chase- HP=330 TQ=655
John Bannister- HP=327 TQ=637
Scott Angell- HP=311 TQ=634
Flint Landrith- HP=228 TQ=526
Dana Trump- HP=217 TQ=447
Ashley Stevenson- HP=196 TQ=427


On a side note Jeremy's truck wasnt performing right as was Adams not wanting to spool up because the tranny wanted to down shift. So his run didnt start until 1900 rpm. Landon from Midwest Diesel had problems due to Injectors {we think that was what it was} I add this because I know their trucks perform better than this!

John
Floor IT Diesel Performance

 

[Mackin]

All right I'll pry .....

What got Craig Macelfresh to 592 HP and 1058 feet Pounds of Torque ???

Any clues ?? Auto or stick ?? 01,02,03 ?? 04 Maybe he's been busy ....


Mac

 

[sdaver]

don't you know the dodge guys hated to post that one.......craig please provide some details

 

[White Duramax]

Craigs is an 01 i believe, 6sp with a custom billet flywheel and double disk clutch, I too want to know what he was runnin to get those numbers.

 

[Michigana_Joe]

Craig McElfresh- HP=592 TQ=1058


CONGRATS! That is awesome!

Edited by: Michigana_Joe

 

[Ray403Dmax]

Spectacular #s!

 

[Quadzilla]

Congrats Craig!


Maybe you can let me in on some power secrets sometime!

On a side note I love that the Dodge boys always have excuses!

 

[NWB Hoss]

Maybe he was running the same stack as Got Juice?????

Oh yea you can't make numbers like that with just a stack

By the way Craig great numbers!!!!!

The bar is being raised for all of us!!!!Edited by: NWB Hoss

 

[Got Juice?]

Maybe he was running the same stack as Got Juice?????

Oh yea you can't make numbers like that with just a stack

By the way Craig great numbers!!!!!

The bar is being raised for all of us!!!!

LMAO...good point.... no flames for this guy, i guess he has the handshake down pat!

 

[Smokin Deezul]

knows what craig has............ nuff said! I am almost sure he wont answer this and neither will I. I used alot of the same stuff on my truck and everyone disputes the numbers. Craig's truck is a 01 6 speed I think he sold the custom clutch. all's I know is the clutch was slipped pretty bad before the dyno runs so I am almost positive it wasnt at its full power. Plus I know the truck has some other issue's to be addressed. lets just say this is just a drop in the pan...... Know's alot of trucks were having issue's..... not bad for a farm truck!





GregEdited by: Smokin Deezul

 

[Got Juice?]

knows what craig has............ nuff said! I am almost sure he wont answer this and neither will I. I used alot of the same stuff on my truck and everyone disputes the numbers. Craig's truck is a 01 6 speed I think he sold the custom clutch. all's I know is the clutch was slipped pretty bad before the dyno runs so I am almost positive it wasnt at its full power. Plus I know the truck has some other issue's to be addressed. lets just say this is just a drop in the pan...... Know's alot of trucks were having issue's..... not bad for a farm truck!





Greg

I can respect that, future mods will include NOT mentioning what goes in or on the truck. Great #'s though! pm me when you have a moment, i do have a question for ya!

 

[Quadzilla]

Maybe he was running the same stack as Got Juice?????

Oh yea you can't make numbers like that with just a stack

By the way Craig great numbers!!!!!

The bar is being raised for all of us!!!!

LMAO...good point.... no flames for this guy, i guess he has the handshake down pat!

I think he was a little light myself.


See the difference is everyone knew what GOT JUICE had. Only a couple know what Mr. CPMac has.

I am sure he will be well over that in the very near future. It won't be long until there are some truly unbelievable numbers are shown. This is just chicken scratch right now.

 

[Smokin Deezul]

SWEET!!! But the number's I am looking for are called ET's.... or 300 Feet.... Not sure which yet... But either way Mac's and Quad is always a part of the chaos.....





GregEdited by: Smokin Deezul

 

[Mackin]

Hey we all don't have out arms flappin .....

Mac

 

[sdaver]

215 plus, pressure box plus,turbo in a bottle(nox)...or
215 plus, compjuice,nox...........must take some injectors to get in the 640's......right quad

 

[Mackin]

All right I'll pry .....

What got Craig Macelfresh to 592 HP and 1058 feet Pounds of Torque ???

Any clues ?? Auto or stick ?? 01,02,03 ?? 04 Maybe he's been busy ....


Mac

Never mind ..... LIL slow at times .....

Mac

GJ I might start ARM flappin soon .....

 

[BMDMAX]

If you want to see the flapping and flames start just have him put Stock with 592HP in his sig.

He probably would have made 800HP on the magic dyno in Georgia.

 

[Mackin]

If you want to see the flapping and flames start just have him put Stock with 592HP in his sig.

He probably would have made 800HP on the magic dyno in Georgia.

You aint turding !!!!!!!!





Mac

 

[Quadzilla]

215 plus, pressure box plus,turbo in a bottle(nox)...or
215 plus, compjuice,nox...........must take some injectors to get in the 640's......right quad

We aren't in the 6's anymore.

He was on stock injectors, possibly bad ones at that.


Congrats on the Baddest 6spd Dmax!

 

[Mackin]

215 plus, pressure box plus,turbo in a bottle(nox)...or
215 plus, compjuice,nox...........must take some injectors to get in the 640's......right quad

We aren't in the 6's anymore.

He was on stock injectors, possibly bad ones at that.


Congrats on the Baddest 6spd Dmax!

You better keep it "together" for the audience.in a few weeks .....

Mac