Diesel Place banner
1 - 2 of 2 Posts

·
Registered
Joined
·
12,262 Posts
Installing shocks is very easy ... No jacks needed if you can get under the truck without a problem ...


All bolts are metric ... Due the fronts first as explained above the rears are a piece of cake ... You will need a small wrench or anouther device to loosen and tighten front shock in order to hold the shock piston from turning when doing the top nut ...





Mac
 

·
Registered
Joined
·
12,262 Posts
SWLA said:
I have a problem then. The fronts did not come with compression bands in place. Should I try to compress them somehow? Any ideas how to do it?
It's very doable .... I normally cut them off anyway from the start ....

I put shocks on my beater last night ....

Mac
 
1 - 2 of 2 Posts
Top