Diesel Place banner

Injector replacement Questions

4423 Views 14 Replies 9 Participants Last post by  boondokr
Looks Like I'm going to be replacing my injectors myself. So where can I find the injectors puller tool? Also does anyone know a good place to find injectors sleeves. The dealer here is useless they want to mark everything crazy high. I've got injectors on the way but am wondering where to find the rest. Any help is appreciated.

I'm going to take lots of pictures and try to post so others can see whats required to do it themselves.
1 - 1 of 15 Posts
I made my own removal tool I took a old fuel line fitting and welded it to a peice of cable with a peice of steel on it like a slide hammer. Just spin it on the injector and pop it out. They have a two peice valve cover and you will need some GMS to reseal the one peice no gasket.
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.