Folks,
I understand that the 06LLY/LBZ engine has 2 thermostats that open at 185*F and 195*F respectively. I want my thermostat to open at a lower temp becasue I would like to draw heat for the on board in cab heating of Veggie oil
Is it possible to reprogram the thermostat to open at a lower temp using the ECM programming alone. Replacing the thermostat is out of the question because there are easier way to accomplish what I want. I am just wondering if there is an even easier way to do this that would not require me to relocate my hoses to go thru the heater core.
I understand that the 06LLY/LBZ engine has 2 thermostats that open at 185*F and 195*F respectively. I want my thermostat to open at a lower temp becasue I would like to draw heat for the on board in cab heating of Veggie oil
Is it possible to reprogram the thermostat to open at a lower temp using the ECM programming alone. Replacing the thermostat is out of the question because there are easier way to accomplish what I want. I am just wondering if there is an even easier way to do this that would not require me to relocate my hoses to go thru the heater core.