Diesel Place banner
1 - 4 of 4 Posts

·
Registered
Joined
·
141 Posts
Happy New Year all.


I wired my high idle today as per the directions from JK and the pics here, which were a great help..Everything works great
Thanks guys.



Also, I rerouted my block heater plug to come out by the license plate bracket and tie wrapped it to the bracket so I don't have to lift the hood everytime I plug or unplug the cord. Very easy to do 10 mins. I removed the plastic hold-down clips and pulled the inner skirt down, took the plug wire out of the harness and tie wrapped it to the frame and out the bumper hole.
 

·
Registered
Joined
·
141 Posts
Heathen


Warming up the truck is what most guys use it for. The temps get down in the teens or single digit during the winter.
 

·
Registered
Joined
·
141 Posts
Hey guys


My high idle has to be pushed twice before it idles high, for the past few weeks since the install, I only had to push it once? any ideas??
 

·
Registered
Joined
·
141 Posts
Thanks TC Dmax


I'll check it out in the Morning..
 
1 - 4 of 4 Posts
Top