Diesel Place banner
1 - 3 of 3 Posts

·
Registered
Joined
·
149 Posts
Paul- the green white wire is on the brake light switch above the brake pedal. If you follow the brake lever up you will see the white switch that kinda moves when you depress the brake pedal. If I remember right the green white is the last wire at the end of the row of wires coming out of the switch.Edited by: army
 

·
Registered
Joined
·
149 Posts
TcdmX- ON THE PART NUMBERS 12084913 IS A PACK OF 5 AND 12084912 IS A PACK OF 10. SUPPOSEDLY THEY ARE THE SAME PIN.


PAUL- THE GREEN WHITE WIRE HAS 12VOLTS ON IT WHEN IN PARK UNTILL YOU STEP ON THE BRAKE PEDAL. THIS CAUSES THE IDLE TO DROP AND IT WON'T COME BACK ON UNTILL YOU PUSH YOU'RE SET OR RESUME BUTTON AGAIN, AT LEAST THAT'S THE WAY IT WORKS ON MINE . MERRY CHRISTMAS ALL!!Edited by: army
 

·
Registered
Joined
·
149 Posts
disconnect it from the ecu-try again - still blows fuse? If yes check for wire or switch terminals shorted to ground. If no you're on the wrong pin location on the computor. Don't reapply power untill you're absolutly sure you're on the proper connector in the right pin location.
 
1 - 3 of 3 Posts
Top