Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
138 Posts
Discussion Starter #1
Tonight my low beams won't come on at all.

The auto sensing circuit seems to be working and the high beams work.

I checked the fuses and swapped the relay but they still don't work. There's voltage at the fuses so I think the ECU thinks they're on. I checked both lamps and they're good.

Anyone have any ideas?????

Thanks
 

·
Registered
Joined
·
825 Posts
You checked the bulbs and the connectors at the bulbs?
 

·
Registered
Joined
·
138 Posts
Discussion Starter #3
Ok...I looked at a friends truck and realized that I had checked the high beam bulbs before so I went out and looked at the low beam bulbs.

Sure as sh!t BOTH of my 5 month Silverstars were burned out!!!!

They were both working last night.

I've run Silverstars before and I knew they don't last as long as some but this is totally unacceptable.

Silverstars are junk....I won't buy them again. I have them in my high beams too and I'm going to change them now also.
 
1 - 4 of 4 Posts
Top