Diesel Place banner
1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Iam turning up the fuel on a 6.2 w/a Banks sidewinder turbo kit. When I turned the crank to the access hole there is no allen screw to adjust. Whats the deal
 

·
Registered
Joined
·
2,315 Posts
WICKED CUSTOMS;1556054; said:
Iam turning up the fuel on a 6.2 w/a Banks sidewinder turbo kit. When I turned the crank to the access hole there is no allen screw to adjust. Whats the deal
There has to be - if the pump was working. The screw puts pressure on a leaf-spring. If the screw was not there, nothing would be holding down the spring, and the pump would fall apart.

Are you looking in the correct place? And, did you rotate the engine to get it to face you?
 

·
Registered
Joined
·
2,315 Posts
Look at these photos

WICKED CUSTOMS;1556054; said:
Iam turning up the fuel on a 6.2 w/a Banks sidewinder turbo kit. When I turned the crank to the access hole there is no allen screw to adjust. Whats the deal



(Image has been resized. Click it for full size.)





(Image has been resized. Click it for full size.)





(Image has been resized. Click it for full size.)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top