H2 wheels with 285s and 305s-PICTURES

RickLBZ;1574120; said:

The caps on mine are from the steel wheels so I trimmed about 1/4 inch around the edge. The lift comes from 5 turns on the t-bars, about 1.75 inches.

Click to expand...

DieselAg;1574955; said:

Sorry to beat a dead horse here, but not understanding how the stock caps fit on is my issue. If I understand what you are saying you trimmed 1/4" off the back side of the stock cap? Is that what everyone else has had to do? What did you use to do that with?:

Click to expand...

1. Pull the four black, plastic spacers of the back of each cap.
2. Take a Dremel or some equivalent to grind off the tabs even with the edge of the cap.
3. Push the black plastic pieces back in.

ccreed;1575112; said:

1. Pull the four black, plastic spacers of the back of each cap.
2. Take a Dremel or some equivalent to grind off the tabs even with the edge of the cap.
3. Push the black plastic pieces back in.

They should now fit.

Click to expand...