Diesel Place banner

H2 wheels with 285s and 305s-PICTURES

10529 Views 26 Replies 19 Participants Last post by  dieseldrunk
Let me start and say, yes my eyeballs are red from looking at all the pictures in garages - 40 pages worth...... I didn't see a lot of pictures of H2 wheels with 285s and 305s. I a little surprised based on the threads with H2. Please post pictures of your rig with H2s......

1 - 3 of 27 Posts
I know you didn't ask but here are my 315/70's.


See less See more
The caps on mine are from the steel wheels so I trimmed about 1/4 inch around the edge. The lift comes from 5 turns on the t-bars, about 1.75 inches.
The chrome caps fit like ccreed said. The silver ones came from a different wheel so thats why i trimmed them. To trim I used a pair of metal shears and went slow. I used a dremel on one but it took too long and gave me the same result.
1 - 3 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.