Diesel Place banner
1 - 11 of 11 Posts

·
Registered
Joined
·
113 Posts
Look in the garage for pics.

initial impression is great. very smooth and handles really well on the highway. corners well. shocks work better than the stock ones imho going over larger bumps. and I'm happy with the CV angle...not too drastic of an angle at all
 

·
Registered
Joined
·
1,006 Posts
your truck looks sweet
 

·
Registered
Joined
·
1,371 Posts
Nice looking truck...and the CV's don't look to bad at all.
 

·
Registered
Joined
·
5,563 Posts
Nice looking truck. How thick are the cv axle spacers on the bds?
 

·
Registered
Joined
·
1,403 Posts
nice truck looks good
 

·
Registered
Joined
·
479 Posts
Are 325's bigger than 315's, Because all the 325's that i've seen on trucks look smaller than 315's. By the way great looking truck!
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #8 ·
nar, tell me how to measure the axle spacers and I'll let you know.
 

·
Registered
Joined
·
5,563 Posts
With a knuckle lift there is usually a spacer, either silver bare aluminum or painted black. It is on the front differential, on each side between the diff shaft itself and the cv axle. Should be easy to see and measure. We could see it in the pic of the cv shaft if you had been at a little more of an angle instead of straight on. I'm just curious to see how thick they are compared to other lifts. Also check and see if they are the same size on each side.
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #10 · (Edited)
1.5" pics of the spacer are in my garage. they're the same on both sides
 

·
Registered
Joined
·
5,563 Posts
Cool thanks...
 
1 - 11 of 11 Posts
Top