Diesel Place banner

1 - 5 of 5 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
Have seen quite a few posts on this but none are the exact same as this. Gauges on the cluster stop working, no surprise, but they do not come back up until I pull the IPC/DIC fuse. After that everything is fine for a month or so. It has happned three time in the past 3 months, What could this be? Ahead of time I would like to thank everyone for the input.
 

·
Registered
Joined
·
2,544 Posts
I have a different problem with mine. It seem to "grind" when I'm at highway speeds. Almost seems like the tach needs to be lubed..
 

·
Registered
Joined
·
274 Posts
Mine does the same thing. I will start the truck and all the gauges stay on "0". They start to work after the truck is restarted a few times. It has happened about 8+ times. Guess it is the part of the bad cluster problems.
 

·
Bac To The Future
Joined
·
23,008 Posts
All of you, have your batteries load tested. These clusters are VERY sensitive to low voltage...and since you all have 03's (like me) that could be where the problem is....
 
1 - 5 of 5 Posts
Top