Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I took out the inner wheel well to run my Block Heater cord to the front today. I noticed that the bottom of the filter has a wire coming out of it that is not plugged into anything. It does appear that there is a mating end of the plug that it could be plugged into. Should this be plugged in or left unplugged? What is the wire for? Fuel Pressure switch or guage maybe? Help!?!
 

·
Registered
Joined
·
447 Posts
water in fuel sensor, I would hook it back up.
 

·
Registered
Joined
·
2,331 Posts
budfan8;1584734; said:
water in fuel sensor, I would hook it back up.
:exactly:
 

·
Registered
Joined
·
120 Posts
The other end is supposed to be clipped onto the valvecover with the heater wire. It may be unclipped and hanging. Just look from the filter toward the front of the motor to find it.
 
1 - 4 of 4 Posts
Top