Diesel Place banner
1 - 4 of 4 Posts

·
Registered
Joined
·
185 Posts
Discussion Starter · #1 ·
Has anyone had any problems with the FS2500 leaking at the seal of the filter housing to the head? Mine is due for its first change and even after tightening the bolt its still leaking very slowly at the seal.


ads
 

·
Registered
Joined
·
161 Posts
Never leaked in 2 years, 65,000 miles.
Did You grease the gasket before you installed it? that may be your problem. Also make sure you don't have double gaskets. Other than that, make sure the edge of the canister is not "dinged". There really isn't much that can go wrong.
 

·
Registered
Joined
·
9,606 Posts
X2
 

·
Registered
Joined
·
112 Posts
Noticed mine was leaking a little bit after I installed it. When oil change time came around, it looked like the replacement gasket for the bypass was a tad bit wider than the one it came with. Haven't noticed a leak since
 
1 - 4 of 4 Posts
Top