Diesel Place banner

1 - 8 of 8 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
What are the first mods you would do to a stock 95 tahoe. Not so much for power, but for better gas mileage and reliability.
 

·
Registered
Joined
·
2,883 Posts
exhaust, go 4 inch and swap x-over pipe
 

·
Registered
Joined
·
584 Posts
JK and others have said that 3 1/2 inch pipe is all that is needed for a moded truck and a good 3 inch for modest mods, so if you can get a good 3 1/2 at a decent price don't over look it. I have a 3 inch which was "IT" durring the time I put it on and it helped.

Intake clean up and gearing if you want to spend the bucks.
 

·
Registered
Joined
·
8,014 Posts
Welcome to the site;

1st mod a free one; spend some days in FAQ stickys, pay close attention to the more performance thread, step by step way to add reliability/performance as you can afford it or as your thirst for "MORE POWER" arh-arh-arh grows
 

·
Registered
Joined
·
189 Posts
1st mod??? Go find a mudhole and get that beautiful shiny Tahoe dirty so it looks like a TRUE 4x4!!!!):h

2nd mod....as much as your wallet and heart desires.:ro)

3rd mod....enjoy many years of dependability from your diesel.
 

·
Registered
Joined
·
3,752 Posts
I'll add - remote mount the PMD.
 

·
Registered
Joined
·
332 Posts
yes gut the intake and open up the exhaust, remove and disable the EGR, and a green air filter (k&n sucks a$$) , boost gauge then a mechanical wastegate.
 
1 - 8 of 8 Posts
Top