Diesel Place banner
Status
Not open for further replies.
1 - 11 of 11 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hello,great site good info I own an 05 crew cab LLY Duramax
I am wondering if i can run a straigt pipe exhaust without setting
any (DTC) or will i run into any other promblems
 

· Registered
Joined
·
672 Posts
Like Nick said some do some dont. I have a 5" on mine with the cat removed and have never thrown a code.
 

· Registered
Joined
·
156 Posts
Bolyard;1553276; said:
Like Nick said some do some dont. I have a 5" on mine with the cat removed and have never thrown a code.
same here, full exhaust no cat, egr blocked. never thrown a code even when i limp. but i bought a fingerstick, just havent needed to install it yet
 

· Registered
Joined
·
658 Posts
It blocks the codes from showing up. Makes the computer think everything is normal.
 

· Registered
Joined
·
4,065 Posts
You might get soft codes stored in your ECM, but no CEL light from what I understand.
 

· Registered
Joined
·
128 Posts
I am about to install my 4" exhaust and was wondering, if it does set off a light, will it effect driveability? Just curious because I'd like to install it before my next road trip but I may not have time to get a finger stick.
 

· Registered
Joined
·
10,333 Posts
It will not effect drivability. The light will eventually go off with about 10 ignition cycles if you dont have a programmer to clear it yourself.
 

· Registered
Joined
·
128 Posts
453 thanks for the reply.....Can I clear it w/ my predator or just read it? Thanks again, Dave
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top