Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I beleive my turbo has the lly due to the 8th digit on the vin is a 2.
So i purchased an edge with attitude.I went to plug it in and the bigger plug would not plug in.The big plug meaning the lower one .The edge has a devider in there plug and on the truck there was none in the connector.So they would not go together.
Am I missing something on did I just purchase the wrong edge unit.
The box said 04-05 lly
My build date is june 18th

Tony
 

·
Registered
Joined
·
65 Posts
Yes you have the LLY Engine. I would double check fitment, there
are two lines with grooves to line up to plug in. If one will plug in
the other side will plug in. Try both sides......
 

·
Registered
Joined
·
9 Posts
Discussion Starter #3
The smaller upper plug went in and locked.The lower bigger plug would not go in and lock.Looking at the edge male plug there was a center divider and the factory one there was not.On the factory female conector there was no provision for that divider.
The smaller connector when you slid it in to the factory connector you would hear it click then you would pull the grey bar down to lock it.
The bigger connector it would not even come close to clicking it.

Tony
 

·
Registered
Joined
·
390 Posts
I have a juice for a LLY right in fornt of me and it also has the divider you are refering to. It was installed in my truck so I know it's the right one for the LLY.
 
1 - 4 of 4 Posts
Top